Priced to sell!

  • Price$299,000
  • Length44'
  • MakeMerritt
  • Built1978

Fort Lauderdale, FL

Now located in Ft. Lauderdale...PRICE REDUCED FOR QUICK SALE!This beautiful custom Merritt is hull #30 built as ‘Makab’. She has fished some of the best fishermen in her day.  As you step onboard and into the salon you will find that this boat feels much larger than a 44’ foot. There is a large sofa and dinette, and just forward is the U-shaped galley. The boat sleeps 4 comfortably in 2 staterooms, one has over under bunks, and the other one has a crisscross (upper and lower) bed configuration. There is one head forward with a full stall shower, in addition to a large storage/rod locker.The boat received a paint job in 2011. Her cockpit features a varnished teak bulkhead with a tackle center with a freezer and drink box, tackle drawers, side compartments, in-deck live well 11.5 kw  generator, and reliable Cummins 8.3 450 hp engines (Recons - installed in 2020) low hours. New hydraulic sea star ram, steering, cables, ZF throttle controls, new end on generator, new shafts, props, Garmin GPS. The bridge provides incredible visibility with the center helm for fishing, and a comfortable entertainment platform for your guest’s. A great little gem for the classic boat enthusiast. Owner motivated! Easy to show in Ft. Lauderdale.

Specifications

  • NameSEA BOOTS
  • Current Price$299,000
  • Year1978
  • Length44'
  • Hull MaterialWood
  • Fuel Capacity300|gallon
  • Beam15 ft
  • Location (city)Fort Lauderdale
  • Location (state)FL
  • Location (country)US

Essential Information

  • MLS® #7549828
  • ModelCustom Sportfish
  • Builder
  • TitlePriced to sell!
  • TypePower
  • Sub-TypeSports Fishing Boats, Convertible Boats, Flybridge
  • StatusActive

Hull

  • # of Cabins2
  • # of Heads1
  • Dry Weight62,000 lb

Engine 1

  • TypePower
  • Fueldiesel
  • MakeCummins
  • Model8.3 CTA
  • Drive TransmissionDirect
  • Power450|horsepower
  • Boat Engine Location CodePort
  • Propeller Type4 Blade, Alloy

Engine 2

  • TypePower
  • Fueldiesel
  • MakeCummins
  • Model8.3 CTA
  • Drive TransmissionDirect
  • Power450|horsepower
  • Boat Engine Location CodeStarboard
  • Propeller Type4 Blade, Alloy

Vessel Walkthrough:

Priced reduced for quick sale!

This custom Merritt is hull #30 built as ‘Makab’. She has many features you see on current models today. As you step into the salon you will find that this boat feels much larger than a 44’ foot. There is a large sofa and dinette, and just forward is the U-shaped galley. The boat sleeps 4 comfortably in 2 staterooms, one has over under bunks, and the other one has a crisscross (upper and lower) bed configuration. There is one head forward with a full stall shower, in addition to a large storage/rod locker.

Her cockpit features a varnished bulkhead with a tackle center that has two large freezers, tackle drawers, side compartments, in-deck live well and a 11.5 kw Kabota generator. In 2020 she received new Cummins recon 450 hp., which are great economical engines and have a comfortable cruise at 24 knots with a top end of 30 knots. Her flybridge has great visibility with the center helm for fishing, plus a comfortable seating platform for your guest’s.  She is a lot of boat and is the perfect size! 

 

Salon and Galley:

Enter the salon through two (2) center double sliding doors. The dinette is directly to the portside aft, with the U-shaped galley forward in the salon. There is a built-in sofa starboard, with Merritt’s stainless refrigeration and freezer units forward built into the teak bulkhead.

• Sofa with storage below
• Dinette seats (4) four with storage drawers under
• U-shaped galley with teak and holly sole
• Merritt stainless refrigerator and freezer
• Microwave/convection oven
• Stainless recessed sink
• Sony am/fm/cd stereo
• Beige interior carpet in companionway and staterooms
• Fusion Stereo/CD/DVD/Sirus Satellite system & JL Audio speakers and amplifier
• 32’ Hitachi HDTV w/ digital antenna mounted on tower
• Cruisair reverse cycle (16,000 BTU) air conditioner with SMX control panel
• New headliner with LED recessed lights (can rotate color scheme)

Companioway:

The electrical breaker panel is located on the portside. There is a storage cabinet on the starboard side beneath the entertainment center. Above is a storage locker and forward is a nice size hanging locker. The head is located off the companionway between the staterooms.

Master stateroom:

Located mid-ship portside.

• Port side mid-ship with a criss-cross layout with the top single and lower double berth
• Storage drawers under lower berth
• Connected door to the head and full shower
• Cruisair reverse cycle (16,000 BTU) air conditioner with SMX control panel

Forward Guest Stateroom:

Located in the forward V-berth with over/under beds.

• Located in the forward V-berth with over/under single bunks
• Storage drawers under berth
• Hanging locker
• Starboard is a vanity with sink and cabinets below
• Hatch above
• Rod rack above top berth

Head:

There is the main door from the companionway and also an entrance from the port stateroom.

•Wood vanity with sink, mirrored cabinet above and storage below
• Raritan electric head
• Poly holding tank
• Stall shower
• Wood sole

Hull and Cockpit Deck:

Modified –V, triple planked mahogany cold molded hull with epoxy fiberglass laminates. 6 portholes, reinforced bulkheads bonded and fastened to hull. Epoxy fiberglass over marine plywood hull. Teak deck and covering boards, white Awlgrip painted non-skid foredeck and side decks. Silicone bronze and stainless fasteners, Stainless steel striker strip rub rail.
• Soda blasted hull bottom paint, applied primer and Interlux bottom paint (2020)
• Hull painted (2011)
• 24” Nibral 4 blade propellers (New 2020)
• 24 x 27” Michigan 3 blade (spare) wheels
• 2008 teak deck and covering boards
• Varnished teak bulkhead
• Storage cabinet port
• Refrigerated drink box starboard with freezer below and tackle drawers
• Custom Merritt fighting chair
• Rupp Triple spreader outriggers
• In-deck bait well with self-circulating water flow
• Fresh & saltwater wash down
• 9.5 kw generator under hatch in cockpit deck
• Engine room access under salon step
• Aluminum ladder with teak steps to the flybridge
• Danforth anchor
• Navigation lights
• Rod holders

Flybridge and Electronics:

Center Merritt teak helm pod with forward bench seating, plus seating port and starboard bench seats on the bridge. There is a soft canvas top overhead, with Strataglass 3- sided curtain enclosure.
• Merritt teak helm pod
• Teak helm chair with stainless pedestal
• ZF throttle engine controls (2020)
• Hydraulic Sea star Steering Ram (2020)
• New steering cables
• Bennett trim tabs
• Furuno 25 KW radar (96 m)
• Garmin MAP 4212 GPS/Plotter (12” display)
• Garmin GPS 4208 Plotter and sounder (8” display) (new 2020)
• Raymarine A57D Plotter
• Garmin AP (auto pilot)
• VHF Sea 156 radio
• Dytek digital seawater temp gauge
• Datamarine depth gauge
• Ritchie compass
• Aqua Meter Saturn compass 3:
• Handheld search light
• Breaker panel
• E.P.I.R.B. 406

Tower:

• Jack Hopewell Tuna Tower with buggy top and vinyl wrap around combing
• Tower steering station with hydraulic Sea Star Ram (installed 2020)
• ZF throttle controls
• Center rigger
• Garmin 4208 GPS/Sounder w/ 2KW transducer
• ICOM M504 VHF radio

Pump and Engine Room:

• Cummins 6CTA 8.3 (in-line 6 cylinder, 4 stroke) twin turbo charged diesel engines  
    (installed in 2020)
• Transmission (direct drive)
• ZF throttle controls
• Hydraulic Sea Star Ram (all new cables)
• Dripless shaft seals
• Reverso Oil change system
• Fuel priming pumps
• Fuel filters (4) Racor (2 primary/2 secondary)
• Raw water cooled exhaust
• Raw water bronze sea strainer
• Raw water bronze seacock
• Fresh water cooling system
• Engine fuel shut-off valve
• Oil transfer system
• Engine temperature alarm
• New shafts (2020)
• New nibral props (2020)
• Rule (7) seven automatic bilge pumps
• Bilge blowers
• High water alarm
• Acoustical & Thermal engine room insulation
• Water heater
• Halon automatic fire suppression tank
• Thermal and acoustical Merritt sound deadening insulation
• CruisAir reverse cycle (16,000 BTU) air conditioner (2 units, 1 new) 

Electrical:

(2) Batteries w/ parallel switch
Dockside electrical cables (50 amp) 120/240 volt in forward cockpit locker
12VDC electrical and 110 AC lighting fixures
110V AC electrical system
Kubota 11.5 kw generator (1800 rpm) diesel
Pro Mariner Automatic battery chargers
12V Alternators
Four (4) 12V batteries - (2) Flybridge subpanel, (1) Engine (1) House

Broker Comments:

The Sea Boots had Cummins recon (8.3) engines installed in 2020 with low hours, efficient motors with a comfortable cruise at 25 knots. These Cummins meet the Tier 3 requirements and are easy to maintain. The generator is only a few year old. This a a little gem is the perfect size, a great running boat, super layout and economical. Current owner spent over $400k on mechanical and electrical updates. He is now a two boat owner, and wants her sold. She is now located in Ft. Lauderdale and available to show. Call for an appointment!

Mechanical Disclaimer

*Engine hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Please provide a valid email address.