Available now
- NameIT'S A WRAP
- Length33'
- MakeBlackfin
- Built1995
$79,000 | Highland Beach, FL
Here is a Blackfin Yacht Corporation 33' Combi built in Ft. Lauderdale, FL. Powered by CAT 3208TA 375hp diesels which have had quite a few updates. Equipped with a Northern Lights generator and a near new Dometic A/C in the cabin. The current owner is selling as he's not been able to use the boat as much as originally planned and may be willing to consider a lower priced center-console trade or even some FL property (unbuilt lot preference).This era of Blackfin was well known for the deep-Vee, solid fiberglass hull designed by Charlie Jannace and has excellent offshore sea keeping abilities, yet still has shallow draft. Prior to the current ownership it was reported this boat had a replaced fuel tank and some electrical wiring updates. The interior has been renovated as well as newer exterior cushions. Look through the full spec where it's notable of many other improvements to this boat since the beginning of 2023.The marlin tower has a full operation helm and is open to one side for easy access plus a bench seat. Cockpit has two underdeck fish boxes and has been plumbed for on-deck live bait well. There is a fighting chair, a walk-through transom door/gate, and underwater lights. This is a lot of boat for this asking price.
Specifications
- NameIT'S A WRAP
- Current Price$79,000
- Year1995
- Length33'
- Hull MaterialFiberglass
- Fuel Capacity340|gallon
- Beam12 ft
- Location (city)Highland Beach
- Location (state)FL
- Location (country)US
Essential Information
- MLS® #9805030
- Model33 Combi
- BuilderBlackfin
- TitleAvailable now
- TypePower
- Sub-TypeSports Fishing Boats, Saltwater Fishing
- StatusActive
Hull
- # of Cabins1
- # of Heads1
- Dry Weight19,132 lb
- Deadrise22 °
Engine 1
- TypePower
- Fueldiesel
- MakeCaterpillar
- Model3208TA
- Hours3225
- Drive TransmissionDirect
- Power375|horsepower
- Year1994
- Boat Engine Location CodePort
- Propeller Type4 Blade, Alloy
Engine 2
- TypePower
- Fueldiesel
- MakeCaterpillar
- Model3208TA
- Hours3225
- Drive TransmissionDirect
- Power375|horsepower
- Year1994
- Boat Engine Location CodeStarboard
- Propeller Type4 Blade, Alloy
This express sportfisherman was built by the original Blackfin Yacht Company and features the solid fiberglass bottom, Deep Vee hull, designed by Charles Jannace. The model was called the 33 Combi and was recognized for offshore sea-ability due to a low center of gravity and hardy construction. On the helm deck there is an L-shape bench seat to the portside and a raised bench style helm seat starboard. A wraparound aluminum framed windshield has an isinglass 3-sided enclosure for weather protection. A hinged cabin door with a flip up tinted plexiglass top, which folds back out of the way, leads down to the cabin.
The cabin has been updated with one feature being a brand-new headliner over the forward berth area and a newer Dometic reverse-cycle A/C unit with digital thermostat. The sole is a grey SeaDek with white margins and there is a U-shaped dinette to the starboard side with a granite table-top. All the cushions here as well as on the helm deck are newer vinyl covered in two-tone color scheme. There is a Samsung flat panel TV mounted outboard behind the dinette on a wallpapered wall. Below on a shelf is a Samsung BluRay CD player and in the next cabinet over a newer Fusion Stereo unit. On the aft bulkhead by the dinette is the main electrical panel with generator control, shore power switching, and a water tank meter. Just forward of the dinette is another granite countertop which separates the berth area. In the cabinet below is a hanging locker. Across on the portside is the galley area with Corian countertop with circular stainless sink and a portion of the counter flips up for a 2-burner electric stovetop. An Isotherm refrigerator and GE microwave are next aft. To the rear on the portside is the door to the head with Corian vanity top and sink. Aft of the galley is another granite countertop with drawer and cabinet below. Next is the berth area which is a full size with a filler cushion section. An overhead deck hatch gives natural lighting.
Electronics and Helm Deck- Garmin 7612xsv GPS/Chartplotter/recording depth sounder/Radar
- Garmin 7408, GPS/Chartplotter/depth
- Garmin dome radar antenna, xHD / new transducer for depth
- Raymarine ST 6002 Autopilot, new control head
- West Marine Vhf585 radio in overhead box
- Danforth magnetic compass
- ACR 406mhz EPRIB
TOWER ELECTRONICS:
- Garmin Echomap 93 SV mounted on a Navpod mount
- Garmin VHF radio - new antenna
- 30amp shore power cord
- 5Kw Northern Lights generator
- Recently new alternators on CAT diesels
- Perko and Guest radial battery switches
- New batteries for generator and starboard main
- ProMariner ProNautic 12v/30amp battery charger
- Main electrical panel in cabin with voltage and amp meters, generator switching
- 2 x 12v Electric reel plugs in cockpit
- LED tower cockpit spreader lights ('23)
Hull and Deck Equipment
- Marlin tower with full control upper helm station - tower has bench seat, canvas buggy top, and fiberglass control box. Tower is open on the starboard side which can be walked through for easy access. Tower helm has tachs, start/stop switches, Panish throttle and clutch controls, trim tab controls, and Danforth magnetic compass. Control box has opening panel and starboard drink holder.
- White hull with black feature stripes and silver accent, black boot stripe and bottom paint.
- 3-sided Isinglass enclosure with U-zip openings
- Single spreader silver outriggers with new standoff support bars (lower position for easier bridge clearance) and collapsible back bars
- Transom door and gate
- 4-step Armstrong-style dive ladder with receiver below transom door
- 3 new LED underwater lights, multi-color changing
- Cockpit coaming bolsters
- Cockpit outlets for saltwater and freshwater washdowns
- Cockpit steps, fiberglass molded to access side decks
- Overhead deck hatch above forward berth
- Aluminum bow railing with burgee mast forward
- Molded factory pulpit with stainless steel anchor roller
- Plough-style galvanized anchor with chain lead and safety cable, nylon rode
- Anchor locker with drainage and 2nd stainless covered hawse pipe to enable additional rode
- Stainless cleats, rub rail strike plate, and cockpit top mounted line hawse pipes
- Maxwell vertical windlass with foot pedal controls on bow or remote control from lower helm station
- Two trumpet stainless steel electric horns
- Fiberglass step box and stainless steel boarding handle
Custom Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.